Ironing Stand Units

Product Information

Ironing Pass Stand Assemblies are fabricated from heavy plate steel and machined to a high degree of accuracy. Outboard bearing blocks are machined to accept precision cage roll bearings. Inboard bearing blocks house double row angular contact bearing assemblies to accurately locate the upper and lower hardened roll shafts. All four bearing blocks have easily accessible grease fittings to allow for periodic lubrication. The inboard and outboard lower bearing blocks are vertically adjustable via bearing block shims to maintain constant bottom-line after the ironing pass rolls have been reconditioned.

This units also feature a camshaft for the upper roll assembly to allow the mill operator to disengage the upper roll assembly (.250" cam movement) for end welds or to lower the roll during mill start-up after the O.D. scarfing is begun. Vertical adjustment of the upper roll assembly is possible via a micrometer indicated vertical adjustment screw located on the top plate.

Option: Air quick release units will be fitted with Ross ISO size 1 single solenoid, 5-way, and 2-position poppet air valve with air valve base, mounting bracket, and necessary piping from the air valve to the rotary actuator (110-volt solenoid control). This allows for automatic engagement or disengagement of the upper ironing roll.

Back to Products Menu